How to Reset Vauxhall TPMS Light
If your Vauxhall tyre pressure warning light has come on, you must first check all tyres are at the correct pressure before attempting a reset. Driving on under-inflated tyres is dangerous and can damage your vehicle.
Reset Type: Dashboard Menu
Most Vauxhall models use a digital menu system to calibrate the sensors.
Step-by-Step Instructions
Adjust all tyres to the correct pressure.
Turn on the ignition.
Use the menu button on the indicator stalk to select 'Vehicle Information Menu'.
Scroll to the 'Tyre Pressure' screen.
Press and hold the 'SET/CLR' button on the end of the stalk.
Confirm reset by selecting 'Yes'.
The system will recalibrate as you drive.
Success! The light should now be cleared. If it stays on or flashes, you may have a faulty sensor or a puncture.
Need a TPMS Tool for your Vauxhall?
If the manual reset doesn't work, you may need a TPMS scanner to diagnose a faulty sensor or link new sensors to your vehicle.
Recommended tools
Handy gear to check and maintain your tyre pressures.
Portable Tyre Inflator
Inflate tyres anywhere — no petrol station needed
View on Amazon →
Digital Tyre Pressure Gauge
Accurate PSI, Bar and kPa readings in seconds
View on Amazon →
Tyre Puncture Repair Kit
Emergency sealant to get you to the nearest garage
View on Amazon →
Search Tyres for Vauxhall All Models
Compare tyre prices from multiple retailers and find the best deals for your vehicle.
View on Amazon →As an Amazon Associate, we may earn from qualifying purchases. Affiliate disclosure
Still seeing the warning light?
If you've followed these steps and the light remains on, it could indicate:
- A slow puncture: One tyre is losing air faster than the others can recalibrate.
- Dead TPMS battery: Sensors usually last 5-7 years. If your car is older, the battery might be dead.
- Interference: Some aftermarket electronics or chargers can interfere with wireless TPMS signals.
Visit our detailed TPMS troubleshooting guide for more help.