← Back to MG Guides
MG logo

How to Reset MG TPMS Light

If your MG tyre pressure warning light has come on, you must first check all tyres are at the correct pressure before attempting a reset. Driving on under-inflated tyres is dangerous and can damage your vehicle.

Reset Type: Dashboard Menu

Most MG models use a digital menu system to calibrate the sensors.

Step-by-Step Instructions

1

Ensure all tyres are inflated to the correct cold pressure.

2

Turn the ignition to the 'ON' position (engine off).

3

Using the steering wheel controls, navigate to the 'Vehicle Settings' menu on the instrument cluster.

4

Select 'TPMS' or 'Tyre Pressure'.

5

Select 'Reset' or 'Calibrate' and hold the confirm button.

6

The message 'TPMS Resetting' or similar will appear.

7

Drive the vehicle for 10-15 minutes at speeds above 30mph to complete the learning process.

Success! The light should now be cleared. If it stays on or flashes, you may have a faulty sensor or a puncture.

Need a TPMS Tool for your MG?

If the manual reset doesn't work, you may need a TPMS scanner to diagnose a faulty sensor or link new sensors to your vehicle.

Recommended tools

Handy gear to check and maintain your tyre pressures.

Search Tyres

Search Tyres for MG All Models

Compare tyre prices from multiple retailers and find the best deals for your vehicle.

View on Amazon →

As an Amazon Associate, we may earn from qualifying purchases. Affiliate disclosure

Still seeing the warning light?

If you've followed these steps and the light remains on, it could indicate:

  • A slow puncture: One tyre is losing air faster than the others can recalibrate.
  • Dead TPMS battery: Sensors usually last 5-7 years. If your car is older, the battery might be dead.
  • Interference: Some aftermarket electronics or chargers can interfere with wireless TPMS signals.

Visit our detailed TPMS troubleshooting guide for more help.