TP
TP Guide
Troubleshooting
15 Oct 2025
6 min read

TPMS Reset Guide: How to Reset Tyre Pressure Warning Light

Your TPMS warning light won't turn off after inflating your tyres? Here's how to reset it, with methods for different car makes and models.

Before You Reset

Always ensure all tyres are inflated to the correct pressure before resetting TPMS. Resetting without fixing the actual problem will cause the light to come back on. Check your door sticker for recommended pressures.

How to Reset TPMS: Common Methods

1. Automatic Reset (Most Common)

Many modern cars reset TPMS automatically after you correct the tyre pressure and drive for a few miles.

  1. 1. Inflate all tyres to recommended pressure
  2. 2. Drive the car for 5-10 minutes at speeds above 20 mph
  3. 3. The system should automatically detect correct pressure and turn off the warning

Works for: Most modern vehicles (2010+) with direct TPMS systems. If the light doesn't go off after 10-15 minutes of driving, try manual reset methods.

2. Reset Button Method

Many cars have a dedicated TPMS reset button, usually located under the dashboard or in the glove box.

  1. 1. Ensure all tyres are at correct pressure
  2. 2. Turn ignition to "ON" (engine can be off)
  3. 3. Locate the TPMS reset button (check owner's manual for exact location)
  4. 4. Press and hold the button until the TPMS light blinks 2-3 times
  5. 5. Release button and start the engine
  6. 6. Drive for a few minutes to complete the reset

Common locations: Under steering wheel, in glove box, near fuse box, or in center console. The button may be labeled "SET", "TPMS", or have a tyre symbol.

3. Infotainment System Menu

Many newer vehicles have TPMS reset options in their touchscreen infotainment systems.

  1. 1. Turn on the ignition (engine can be off)
  2. 2. Navigate to Settings or Vehicle Settings menu
  3. 3. Look for "Tyre Pressure", "TPMS", or "Tyre Settings"
  4. 4. Select "Reset" or "Relearn" option
  5. 5. Confirm the reset
  6. 6. Drive for a few minutes to complete the process

Note: Menu locations vary by manufacturer. Check your owner's manual for specific instructions for your model.

4. Driving Pattern Method (Indirect TPMS)

Some older vehicles use indirect TPMS (based on wheel speed sensors) and require a specific driving pattern to reset.

  1. 1. Inflate all tyres to correct pressure
  2. 2. Drive at steady speed (50-60 mph) for 15-20 minutes
  3. 3. The system learns the new baseline pressure through wheel speed differences

Used by: Some older vehicles and certain European makes. This method relies on the ABS system detecting pressure differences.

Make-Specific Reset Methods

BMW, Mercedes-Benz, Audi

Usually reset automatically after correcting pressure and driving. Some models have reset option in iDrive/COMAND/MMI menu.

Ford, Vauxhall, Peugeot

Often have a reset button under the dashboard or in the glove box. Check owner's manual for exact location.

Toyota, Honda, Nissan

Most models reset automatically. Some have a reset button near the steering wheel or in the center console.

Volkswagen Group (VW, Skoda, Seat)

Usually automatic reset, but some models require menu navigation in the infotainment system.

Important: Always refer to your specific vehicle's owner's manual for the exact reset procedure. Methods can vary even within the same make depending on model year and trim level.

Troubleshooting: Light Won't Reset

  • •Double-check pressure: Ensure all tyres (including spare if monitored) are at correct pressure
  • •Check when cold: Pressure readings must be taken when tyres are cold for accuracy
  • •Drive longer: Some systems need 15-20 minutes of continuous driving to reset
  • •Battery disconnect: Some vehicles reset after disconnecting battery for 15 minutes (check manual first)
  • •Sensor battery: If light flashes then stays solid, a sensor battery may be dead
  • •System fault: Persistent warning may indicate a faulty sensor or system malfunction

When to Visit a Garage

  • •Light flashes then stays solid: Indicates a sensor fault, not just low pressure
  • •Won't reset after multiple attempts: System may need professional diagnosis
  • •After tyre replacement: New tyres may require sensor relearn procedure
  • •Sensor battery dead: TPMS sensors have internal batteries that eventually need replacement
  • •After wheel/rim replacement: May need sensor replacement or relearn
  • •Can't find reset method: Professional garages have diagnostic tools to reset any system

Prevention Tips

  • Check tyre pressure monthly to prevent TPMS warnings
  • Keep a pressure gauge in your car for regular checks
  • Check pressure when tyres are cold for accurate readings
  • Know your car's reset procedure - keep owner's manual accessible
  • Have TPMS sensors checked during annual service

Related Guides

TPMS Warning Light Guide

Learn what the TPMS warning light means and what to do when it appears.

Read guide →

How to Check Tyre Pressure

Step-by-step guide to checking your tyre pressure correctly.

Read guide →

Popular Car Makes

Find the correct tyre pressure for your specific make and model:

BMWMercedes-BenzAudiFordToyota

Find Your Car's Recommended Tyre Pressure

Search our database of 465+ car models to find the exact tyre pressure for your vehicle.

Search Your Car

Important Safety Notice

Tyre pressures shown on this site are general guides only. Exact pressures depend on your tyre size, load, speed rating and market. Always confirm your pressures using the sticker inside your car's door, your fuel flap or your official owner's manual before driving.